Articles

Colores de ventanas de PVC: blanco, antracita e imitación madera

What Color PVC Windows Should You Choose? Trends and Tips

Years ago, PVC windows were white, and that was that. Today, the catalog is much broader, which is exactly why choosing has become complicated: the color of the frame changes the facade, the room's atmosphere, and even how the window performs under the sun. Let's break it down.

How color is achieved in a PVC window

PVC profiles are manufactured in white. Other colors are achieved through foiling: a decorative film that is bonded to the profile at the factory to replicate a specific tone or wood grain. A high-quality foil resists solar radiation, does not peel, and is cleaned just like white. Therefore, rather than the color itself, it is worth asking about the quality of the foil and the finish warranty.

White is still winning, and for good reason

It’s not a lack of imagination. White fits almost any facade, reflects light better than dark tones, and blends in effortlessly if the homeowners' association requires uniformity. It has one drawback: in a house with white walls, the overall look can feel flat. It’s a matter of personal taste, but it’s worth thinking twice before repeating the same tone everywhere.

Anthracite and black: character for the facade

Dark frames have been gaining ground in renovations and new builds for years. Anthracite looks great on light-colored facades, exposed brick, or large glass surfaces; black creates clean lines and suits minimalist or industrial styles well.

Now, for the nuance. A dark frame absorbs more heat than a white one, and with the hours of sun we get in Valencia, that is not a minor detail. As it heats up, the profile expands more, so for large windows facing south or west, it is advisable to have a profile with steel reinforcement and a foil with heat-reflecting pigments. Ask about these two points and the finish warranty before deciding.

Golden oak, walnut, and wenge: the warmth of wood

If you want the look of wood joinery without the periodic varnishing it requires, wood-imitation finishes are the logical choice. Golden oak softens and brightens the room. Walnut and wenge, which are deeper, go well with parquet floors or dark interior doors. In practice, the most common mistake is choosing the tone based on a photo on a screen: walnut and wenge look much more similar on a phone than they do on the wall.

One color on the outside and another on the inside

Many people don't know that the exterior and interior of the window can be different. The most common combination is anthracite on the outside, to harmonize with the facade, and white on the inside, so as not to darken the room. At Comfort House PVC, you can configure each side separately, choosing from white, black, golden oak, walnut, wenge, and anthracite.

Remember that shutters, shutter boxes, and insect screens are part of the overall look: if the colors clash, it will be noticeable from the street.

If you live in an apartment: check with the community first

In an apartment building, the exterior color of the windows is part of the facade, which is a common element. Changing it may require the agreement of the homeowners' association, and some municipalities also regulate colors in historic districts. Before ordering a tone different from the rest of the building, check the bylaws or ask the property manager. On the inside, however, you can choose whatever color you like.

How to decide without regrets

Start with what you aren't going to change: floors, front door, facade. The frame needs to complement them. Then, think about the orientation of each window and the light that enters throughout the day. Finally, look at a sample in natural light, never just on a screen. A color you like in a catalog can look quite different next to your wall.

Color also changes over the years

White is a versatile choice, but low-quality profiles can yellow over time; that is why the manufacturer of the profile matters just as much as the shade you choose. Dark and wood-effect finishes require an occasional wipe with a damp cloth and mild soap, avoiding abrasive cleaners or solvents that could scratch or damage the foil. In our guide on how to clean PVC windows we explain which products to use, which to avoid, and how to remove yellowing.

And don't forget that color is only one part of the equation: the profile, the glass, and the installation all play an equal role in the final result.

Frequently Asked Questions

Which PVC window color is most resistant to the sun?

White heats up the least. Darker shades work well if the foil is high-quality, featuring heat-reflecting pigments, and the profile includes steel reinforcement.

Can I have one color for the outside of the window and a different one for the inside?

Yes. The most popular combination is anthracite on the outside and white on the inside, but each side can be configured separately.

Are colored windows more expensive than white ones?

Yes, usually a bit more, because foiling is an additional process. The exact price depends on the color, whether it is applied to one or both sides, and the dimensions. We explain this in our guide to PVC window prices in Valencia.

Do I need permission to change the color of the windows in an apartment?

The exterior color is part of the building's facade, so it is best to check with your homeowners' association. You are free to choose the interior color as you wish.

Calculate your quote and choose your color online

In our online calculator choose your window type, glass, shutter, exterior and interior color, and dimensions to receive a personalized, no-obligation quote. If you prefer to see the colors in person, contact us and we will show you the samples.

‍

go back

artículo próximo